CUBE TESTING MACHINE
Made with premium grade raw materials, with cutting edge performance. Robust construction, reliable for serving the purpose of testing cubes.
Category: Material Testing
CONCRETE FLOW TABLE
Recommended for concrete where nominal size of coarse aggregates does not exceed 38 mm. Comprises of machined mild steel table top of 762 mm. diameter, and fitted on a heavy duty Cast Iron frame. A cam action provides a free fall of 12.5 mm. to the table. Equipped with a conical mould of 120 mm. height with base diameter of 250 mm. and top diameter of 170 mm. is also provided along with tamping rod size 16 mm. diameter x 600 mm. long.
ACCELERATED CURING TANK
Used for concrete testing purposes. The inner chamber of Accelerated Curing Tank is made of stainless steel and outer body is made of mild steel, which is duly powder coated. Suitable for accommodating 6 or 12 cube moulds of 150 mm. The temperature range from 5oC above ambient to 100oC.
• Temperature Controller Cum Indicator
• Water Circulation Pump
• Calibration Certificate is Provided For Digital Controller
Used to determine the liquid limit of soil which has low plasticity index. The moisture percentage contents determined when cone with half angle of 30° under a total sliding weight of 148 gm. penetrates 25 mm. in soil sample gives the liquid limit. Supplied complete with standard cup of dimension 50 mm. dia x 50 mm. depth. This Cone Penetrometer is hand operated and scale type.
COMPRESSIVE STRENGTH TESTER
Compression testing Machines are the finest of their types available. Their rugged construction and extreme simplicity makes it possible to operate them with ease and complete dependability.
Compression Testing Machines calibrated with an accuracy of ± 1% as per the requirement of 1828(Grade A) These machines are available in 50 kN, 100 kN, 500 kN, 1000 kN, 2000 kN, 3000 kN, & 5000 kN Capacities.
Compression Testing Machines Classification :
• Analogue models.
• Digital models.
Features of Compression Testing Machines are :
• Highly stable.
• Self-aligning platen assembly.
• Load Gauges are calibrated in Kn against certified Proving Rings, traceable to MSME / NCCBM.
• Suitable for testing cubes and cylinders of various sizes, Cubes from 50 mm.³ to 300 mm.³ Cylinders from 100 mm. to 300 mm.
• Logged data printing facility through a parallel port Interface available in digital base models.
Pace rate (display only ) available in Digital models.
2000 KN compression testing machine consists of a steel base and cross head welded along side with heavy-duty plates. The hydraulic
loading jack is fixed on the base and lower platen rests entrally on the jack. The upper platen is attached to the head plate. The upper platen has got a spherical seating for a self-aligning action. For adjusting the vertical day light spacers are used as per the specimen height requirement. Micro safety switch has been incorporated within digital display unit assembly, which will switch off the motor when load is between 1800-1850 kn to avoid overloading of the loading frame.
Maximum Testing Force : 2000kn
Max. Vertical Clearance (mm.) : 315
Max. Horizontal Clearance (mm.) : 315
Load Display : 4 Digit Digital
Platen Size (mm) : 220 mm. Square
Piston Diameter (mm.) : 205
Piston Travel (mm.) : 50
Motor Power (HP) : 1 hP/Threephase
Net weight (kg.) : 600