ENVIRONMENTAL CHAMBER & HUMIDITY CABINET
Robust construction, Safe, Accurate with Long Life
Double walled construction, Outer chamber of mild steel with powder coated paint; Inner Chamber of aluminum or Stainless steel ; Gap of 75 mm. between outer and inner is filled with glass wool to prevent thermal loss. Outer door fitted with a glass window to view inside material. Fitted with a self cooled air circulation fan to maintain uniform temperature and Humidity through out the chamber. Fitted with Refrigerator system to control temperature range. Humidity is controlled with Humidistat. Stainless steel water tank. All the controls given on the front panel. With thermal fuse circuit braker which do not allow temperature to go too high or too low. With control system to ensure synchronization between Moisture and temperature.
Temperature Range : 100 C to 50 ° C, with Digital temperature Indicator and Controller, accuracy +1% or with Thermostat
Moisture Range : 30 -95%, +- 3%
Shelves : Five
No of Position : 6-8
Power : 220 V 50 Hz A.C Mains
Size ( Inside Chamber) W x H x D mm
• 455 x 455 x 455 mm.
• 455 x 455 x 710 mm.
• 605 x 605 x 605 mm.
• 605 x 605 x 910 mm.
• 750 x 650 x 900 mm.
Optional: Hygrometer i.e Humidity Indicator. Digital Temperature Controller Cum Indicator. Thermostat with an accuracy of + 0.5° C. Microprocessor PID Digital Temperature Controller Cum Indicator. Automatic electronic controller with digital display for temperature and Humidity Control. Automatic Voltage stablizer of 3 KVA
Category: Agriculture Equipment
Suitable for testing physical purity of Grain/Seed samples.
Suitable to be used to distinguish, discolored, damaged wand chalky grains/seeds. Light below the rectangular 8’’ x 5’’ opal glass
SEED GRADING SIEVES
Made out of either brass or G. I. And wire mesh or perforated Mild Steel sheet, designed to confirm to specification set by .I.S. Standard sieves has 8” or 12” dia, 2” approx depth. Frames are skirted to nest together. Suitable for grain/seed grading.
Display: Seven Segment FND
Seed Size: 0.5 mm to 15 mm.
No of Seeds in a Batch: Up to 9999 Seeds
• Batching, repeat and multiple
• Batches creating facility.
• Batch Count
• Accurately counts a predetermined number of seeds in a single Batch.
Repeat Batch: Allows for the continual duplication of a single batch count.
Multiple Batch Batch counts can be set to count number of batches with different seed counts
Used for the easy dividing and reduction of bulk material samples with particle sizes ranging from less than 1 mm. up to a maximum of 10 mm. Our Riffle sample divider consists of a sheet metal box mounted on legs and fitted with a series of chutes or equal width which discharge the material alliteratively in opposite directions into speculate panes. The chutes of the riffle are steep enough to allow rapid flowing of the material for the rapid preparation of sample, i.e. division into two representative portions. Each constructed of heavy gauge sheet metal, with particular attention given to reinforcement of the portions to maintain the accuracy of the slot dimensions. This equipment is mainly used for sampling aggregates, cement, ores, refractory materials, pigments, soap, powdered coal etc. It is also used for rapid collection of true representative sample from aggregates, sand and fillers.
• Rock and aggregate Industry
• Cement Industry
• Ceramics Industry