FLAKINESS & ELONGATION INDEX APPARATUS
Efficient elongation index, helps in determining the elongation index of the aggregate. When the length is more than 1.8 of the normal size, then the aggregate particles are considered elongated. Includes the hard wood base with the vertically mounted studs as per specifications. Flakiness index helps in determining in flakiness index of the aggregate. The aggregate particles are to be flaky, if the thickness is less than the 0.6 of their normal size. Complete assembly is chrome plated which includes frame with the sliding panel with accurate slots of standard width and length.
Category: Material Testing
AUTOMATIC COMPACTION HAMMER & ASSEMBLY FOR BITUMEN SAMPLE
The automatic compactor eliminates the tidious process of manual compaction and an even degree of compaction is achieved. The drive mechanism lifts the weight of 4.5 kg. and drops it through a correct height of 457 mm. The rammer foot is removable, which facilitates preheating. A compaction pedestal with specimen holder is fixed to the base. An automatic blow counter enables the number of blows to be preset before each test and automatically stops the machine on completion. Suitable for 220-240 volts, 50 Hz, single phase.
AGGREGATE JAW CRUSHER
Aggregate Jaw Crusher is for fast crushing of aggregates ores, minerals, coke, coal, chemicals and similar materials. Our Aggregate Jaw Crusher is compact and of rugged construction for general laboratory and small pilot plant operations.
This laboratory jaw crusher is available with two jaws of manganese steel. The mobile jaw creates two blows for every revolution thereby minimizing the size to a minimum. A combination of downward and forward strokes having a rocking action exerts pressure on the coarse material, yet allows the finished material to move through the jaws. Provided with a hopper on the top for feeding material. The smooth jaws ensure a uniform product thereby allowing easy cleaning.
Jaw Size 100 x 150 mm.
Size of feed Material 50 mm. (approx)
Yield 80 kg./hr (approx)
Size of finished Product 6-8 (Adjustable)
Power Requirement 400 volts, 3 Phase
COMPRESSIVE STRENGTH TESTER
Compression testing Machines are the finest of their types available. Their rugged construction and extreme simplicity makes it possible to operate them with ease and complete dependability.
Compression Testing Machines calibrated with an accuracy of ± 1% as per the requirement of 1828(Grade A) These machines are available in 50 kN, 100 kN, 500 kN, 1000 kN, 2000 kN, 3000 kN, & 5000 kN Capacities.
Compression Testing Machines Classification :
• Analogue models.
• Digital models.
Features of Compression Testing Machines are :
• Highly stable.
• Self-aligning platen assembly.
• Load Gauges are calibrated in Kn against certified Proving Rings, traceable to MSME / NCCBM.
• Suitable for testing cubes and cylinders of various sizes, Cubes from 50 mm.³ to 300 mm.³ Cylinders from 100 mm. to 300 mm.
• Logged data printing facility through a parallel port Interface available in digital base models.
Pace rate (display only ) available in Digital models.
2000 KN compression testing machine consists of a steel base and cross head welded along side with heavy-duty plates. The hydraulic
loading jack is fixed on the base and lower platen rests entrally on the jack. The upper platen is attached to the head plate. The upper platen has got a spherical seating for a self-aligning action. For adjusting the vertical day light spacers are used as per the specimen height requirement. Micro safety switch has been incorporated within digital display unit assembly, which will switch off the motor when load is between 1800-1850 kn to avoid overloading of the loading frame.
Maximum Testing Force : 2000kn
Max. Vertical Clearance (mm.) : 315
Max. Horizontal Clearance (mm.) : 315
Load Display : 4 Digit Digital
Platen Size (mm) : 220 mm. Square
Piston Diameter (mm.) : 205
Piston Travel (mm.) : 50
Motor Power (HP) : 1 hP/Threephase
Net weight (kg.) : 600
This pedestal stabilizes molds during compaction. 8 x 8 x 18″ wooden post capped with a 12 x 12 x 1″ steel plate. Mounts to a concrete slab with four angle brackets.