• Safe, Easy to use, Provide a controlled Environment
• Robust construction, with Accurate controls,
• With Long Trouble free Life
Double walled construction, Outer chamber of thick mild steel with rust proof powder coated paint; Inner Chamber of Stainless steel ; Gap of 75 mm between outer and inner is filled with glass wool to prevent thermal loss; Provided with double door, so as there is no contamination and drops or rises in temperature, and at the same time an optimal view of the sensitive load through wide-area interior glass doors inner made of thick transparent full view glass and outer door is double walled mild steel. Whole unit is mounted on castor wheels for easy movement. With a self cooled air circulation fan to maintain uniform temperature and Humidity through out the chamber; Humidity is controlled with Humidistat. Inside water tank of stainless steel. All the electronic controls given on the front panel. With thermal fuse.
Temperature Range : From ambient to 60°C ,controlled by Dual Display Microprocessor PID Digital Temperature Indicator cum Controller.
Humidity range: Up to 95% and controlled by Dual Display Microprocessor PID Digital Humidity Indicator cum Controller.
Shelves : Two or Three
Power : 220 V 50 Hz A.C Mains
Size of the Inner Chamber :
|Width x Depth x Ht. mm.||
|17.01||455 x 455 x 455||
|17.02||455 x 455 x 710||
|17.03||605 x 605 x 605||
|605 x 605 x 910||
|900 x 900 x 900||
|17.06||1200 x 1200 x 1200||
Any other size can be made as per the customers requirement.
Category: Agriculture Equipment
LAB MODEL RICE POLISHER
• Superior finish
• Easy Maintenance.
• High Capacity with low power consumption.
• Simple and trouble free mechanism.
Sample Capacity: 250 gm Approx
Power Required: 0.50 H.P. Single Phase
Dimensions: 600 x 400 x 400 mm (L x B x H)
Suitable for testing physical purity of Grain/Seed samples.
Suitable to be used to distinguish, discolored, damaged wand chalky grains/seeds. Light below the rectangular 8’’ x 5’’ opal glass
SEED COUNTER MICRO CONTROLLER
• Micro Controller based 2 x 16 column alphanumeric LCD display
• Membrane Keyboard, Easily detachable pan
• Counts seeds of sizes from 1 mm to 15 mm
• Counts maximum up to 999999 seeds in a lot
• Counting speed can be regulated
• Batch creating facility
• Programmable batch, number of lots in a batch through membrane keypad
• Programmable stop counts
• Electromagnetic Vibratory Feeder
• Up-to electronic sensor (for detecting the seeds)
RS 232 interface capabilities for attaching computer and printer. Parallel port for parallel printer
Power supply 220 V/50 Hz operated
Used for the easy dividing and reduction of bulk material samples with particle sizes ranging from less than 1 mm. up to a maximum of 10 mm. Our Riffle sample divider consists of a sheet metal box mounted on legs and fitted with a series of chutes or equal width which discharge the material alliteratively in opposite directions into speculate panes. The chutes of the riffle are steep enough to allow rapid flowing of the material for the rapid preparation of sample, i.e. division into two representative portions. Each constructed of heavy gauge sheet metal, with particular attention given to reinforcement of the portions to maintain the accuracy of the slot dimensions. This equipment is mainly used for sampling aggregates, cement, ores, refractory materials, pigments, soap, powdered coal etc. It is also used for rapid collection of true representative sample from aggregates, sand and fillers.
• Rock and aggregate Industry
• Cement Industry
• Ceramics Industry