PLANT GROWTH CHAMBER
Outer wall of mild steel sheet duly painted and inner wall of heavy gauge aluminum or stainless steel sheet filled with high grade glass wool to avoid thermal loss. Besides outer double walled door, a full view inner glass door allows inspection of test samples without disturbing the inner chamber conditions. Unit is supplied with three adjustable perforated shelves. Temperature range is from 5o to 50oc + 1o c is controlled by Dual Setting digital temperature indicator-cum-controller so as to set two different temperatures for day and night. Exterior illumination with fluorescent tubes fitted on both sides of the chamber accounts for artificial day light, and the cyclic illumination condition are regulated by automatic 0-24 hrs. timer when all the tubes are ON temperature from 15oc to 50o c can be obtained. Humidity varies from Ambient to 95%+ 3% RH is controlled by a controller at temperature ranging from ambient to 50oc and the same is achieved by means of injecting steam. Arrangements for increasing the humidity is providing and not for decreasing Size, Width x Height X Depth
(I) 505 x 830 x 415 mm. ( 6 Cu. Ft.)
(ii) 570 x 875 x 550 mm. ( 10 Cu. Ft.)
(iii) 650 x 900 x 550 mm. ( 12 Cu. Ft.)
(iv) 700 x 900 x 650 mm. ( 15 Cu. Ft.)
(v) 775 x 900 x 775 mm. ( 20 Cu. Ft.)
(vi) 825 x 1200 x 825 mm. ( 30 Cu. Ft.)
(vii) 900 x 1720 x 800 mm. ( 45 Cu. Ft.)
Category: Agriculture Equipment
Precision Divider(Gamet Type)
Catalogue No. NAP-02 Size 38 X 31 X 51 Cm. (approx.) Hopper Capacity 2kg Electric Motor 0.5 H.p. Single Phase Material Chrome Plated Brass And Mild Steel Principal Centrifugal Action, Motor Driven
Used for the easy dividing and reduction of bulk material samples with particle sizes ranging from less than 1 mm. up to a maximum of 10 mm. Our Riffle sample divider consists of a sheet metal box mounted on legs and fitted with a series of chutes or equal width which discharge the material alliteratively in opposite directions into speculate panes. The chutes of the riffle are steep enough to allow rapid flowing of the material for the rapid preparation of sample, i.e. division into two representative portions. Each constructed of heavy gauge sheet metal, with particular attention given to reinforcement of the portions to maintain the accuracy of the slot dimensions. This equipment is mainly used for sampling aggregates, cement, ores, refractory materials, pigments, soap, powdered coal etc. It is also used for rapid collection of true representative sample from aggregates, sand and fillers.
• Rock and aggregate Industry
• Cement Industry
• Ceramics Industry
SEED DIAL CALLIPER
Good quality , Sturdiness, Smooth finish
Analog measuring device for measurement of Length and Breath of Seeds.
Display: Seven Segment FND
Seed Size: 0.5 mm to 15 mm.
No of Seeds in a Batch: Up to 9999 Seeds
• Batching, repeat and multiple
• Batches creating facility.
• Batch Count
• Accurately counts a predetermined number of seeds in a single Batch.
Repeat Batch: Allows for the continual duplication of a single batch count.
Multiple Batch Batch counts can be set to count number of batches with different seed counts