With heavy gauge mesh (4 mesh 20 s.w.g.) mounted in a sturdy frame of mild steel angle, size 18″x 14′ x 14″ with door in front. wire walk floor of 5/8″ mesh, beneath is a 1″ deep tray (drawer) of Galvanized sheet which slides in an angle attached to the slides of the cage removable for cleaning. Finished in a hammer tone paint. Provided with a card holder.
Category: Pharmacy Apparatus
BULK DENSITY APPARATUS
Electrically operated, Elegant design for smooth operation . To study the packing down of powder beds of different pharmaceuticals and Chemicals in the process of tablet manufacturing, capsule filling & cosmetics, Installed with an automatic device for preset of strokes. Gear driven noiseless and sturdy motor, also provided with an Electronic timer, works on 220-230 V AC, 50 Hz.
DISINTEGRATOR MOTOR DRIVEN
Laboratory size, harmer type, with ¼ H.P. heavy duty motor (single phase) 220 volts, A.C. Consist of four steel hammers fixed to a disc of 75 mm. in diameter with 25 mm. thickness, through which passes a shaft being revolved at 3000 R.P.M. The hammers are enclosed in a casted Drum, the sides & upper surface of which are roughened. The inner screen (sieves) of different mesh size 9 a set of three sieves of courses, medium and fine supplied. Hopper made of heavy aluminum sheet built on angle iron frame.
BALL MILL, MOTOR DRIVEN
(I) A compact unit built on metal platform, with geared motor which revolves a drum and contains a stainless steel (capacity 1 kg.) The drum rotates on the metal brackets. Complete with set of balls means lead and plug provided (5 Amp) Work on 220 volts A.C. Capacity 1kg.
(ii) Same as above, but Stainless steel Drum of capacity 2Kg.
(iii) Same as above, but Aluminum Drum of capacity 1Kg.
(iv) Same as above, but Aluminum Drum of capacity 2Kg.
TABLET MACHINE HAND OPERATED
PVG’s Tablet Making Machine (Hand Operated) is used for making tablets up to 1000 mg and Size of punch & die is 8 mm. Automatic compression and ejection device has been provided, actuated by revolution of the wheel drive. Feed and removal of tablets has also been made automatic. Accentric pressure system has been applied for easy setting of thickness and hardness of tablets. Astainless steel hopper has been given. These Tablet Making Machine (Hand Operated) has been mounted on a mild steel fabrication.
Supplied complete with one die and punch set of stainless steel. easy setting for thickness & hardness of tablets with nuts and lock nuts.