Used for the easy dividing and reduction of bulk material samples with particle sizes ranging from less than 1 mm. up to a maximum of 10 mm. Our Riffle sample divider consists of a sheet metal box mounted on legs and fitted with a series of chutes or equal width which discharge the material alliteratively in opposite directions into speculate panes. The chutes of the riffle are steep enough to allow rapid flowing of the material for the rapid preparation of sample, i.e. division into two representative portions. Each constructed of heavy gauge sheet metal, with particular attention given to reinforcement of the portions to maintain the accuracy of the slot dimensions. This equipment is mainly used for sampling aggregates, cement, ores, refractory materials, pigments, soap, powdered coal etc. It is also used for rapid collection of true representative sample from aggregates, sand and fillers.
• Rock and aggregate Industry
• Cement Industry
• Ceramics Industry
Category: Agriculture Equipment
SEED ANALYSIS KIT
Used to check the quality of food grains, in coming materials in mandies and seed plants. Can also be used seed grader(lab modal) to assess the fraction of various impurities and immature grains.
• Easy to use
• Accurate results
• Perfect finish
Includes enameled plate, weighing balance up to 100gm, weight box up to 100gm, parkhi 9″, sieve 3. 30 mesh, magnifying glass’, scoop, vernier caliper, palm husker, broken separator, forceps, petridish, measuring cylinders 10cc, 20cc, 50cc, 100cc. All packed in a compact wooden case.
SEED GRADING SIEVES
Made out of either brass or G. I. And wire mesh or perforated Mild Steel sheet, designed to confirm to specification set by .I.S. Standard sieves has 8” or 12” dia, 2” approx depth. Frames are skirted to nest together. Suitable for grain/seed grading.
GRAIN/RICE SIZING DEVICE
Screen Area: 600 x 250 mm.
Sample Size: 500 G
Grain Sizing: 1.6, 3.2, 4.8 mm.
SEED GERMINATOR (SINGLE CHAMBER)
Most suitable for contducting various experiments on a variety of seeds under different conditions of temperature and humidity.
Atmospheric conditions are created within the chamber to perform different experiments without going onto the field. The double walled unit has inner chamber made up of anodized aluminium or of Stainless Steel and outer chamber of Mild Steel Sheet duly painted. Temperature from 5 Degree Centigrade to 50 Deg. C +- 1 Deg. Cent. is controlled by Digital temperature indicator-cum-controller. Humidity (Not Adjustable) is created in a stainless steel water reservoir fitted at the bottom 90% to 95% +- 3% RH Humidity. Complete with 8 or 14 adjustable perforated trays. Supplied complete with cord and plug to work on 220/230 V 50 Hz A.C. supply. Inside Chamber size
Chamber Size mm. Capacity cu.ft. No. of Trays 15.01