- To be used with kymograph to note
- Effect of stimulation voltage (simple muscle twitch)
- Effect of stimulation frequency (tetanus)
- Effect of repeated stimulation (fatigue)
- Effect of drugs on muscles
Effect of pre- and after loading on muscles efficiencyHoused in a metal box, All the controls are located on the front panel with start/stop function, pulse width, frequency selection mode with variable range, 2 x 4 mm. sockets, volt selection rotary switch with maximum output of 25 V with less then 25 ohm impedence, with Analog or Digital displays
Category: Pharmacy Apparatus
BULK DENSITY APPARATUS
Electrically operated, Elegant design for smooth operation . To study the packing down of powder beds of different pharmaceuticals and Chemicals in the process of tablet manufacturing, capsule filling & cosmetics, Installed with an automatic device for preset of strokes. Gear driven noiseless and sturdy motor, also provided with an Electronic timer, works on 220-230 V AC, 50 Hz.
FRIABILITY TEST APPARATUS SINGLE
Used to determine the durability and abrasiveness of tablets. A transparent perspex drum of perspex sheet 6.4 mm. thick, 300 mm. dia x 35 mm. deep and white cover disc and nut, also a shaped radial fixed blade which carries the tablets along with it up to the central height and lets them of while the drum is rotating. Thus the tablets rub against each other without any hard impact. the drum rotates at a fixed speed of 30 R. P. M. by a geared motor and the rotation period is controlled by a timer having duration of 1 to 15 minutes per determined end preset. The motor unit is housed in a shaped mild steel cabinet with shaft extended on one side upon which the drum rotates. Switches with neon indicators and time switch are fitted on a panel land provided, work on 220 volts 50 Hz A.C.
DISINTEGRATOR MOTOR DRIVEN
Laboratory size, harmer type, with ¼ H.P. heavy duty motor (single phase) 220 volts, A.C. Consist of four steel hammers fixed to a disc of 75 mm. in diameter with 25 mm. thickness, through which passes a shaft being revolved at 3000 R.P.M. The hammers are enclosed in a casted Drum, the sides & upper surface of which are roughened. The inner screen (sieves) of different mesh size 9 a set of three sieves of courses, medium and fine supplied. Hopper made of heavy aluminum sheet built on angle iron frame.
BALL MILL, MOTOR DRIVEN
(I) A compact unit built on metal platform, with geared motor which revolves a drum and contains a stainless steel (capacity 1 kg.) The drum rotates on the metal brackets. Complete with set of balls means lead and plug provided (5 Amp) Work on 220 volts A.C. Capacity 1kg.
(ii) Same as above, but Stainless steel Drum of capacity 2Kg.
(iii) Same as above, but Aluminum Drum of capacity 1Kg.
(iv) Same as above, but Aluminum Drum of capacity 2Kg.