SUSPENDED LAMINAR AIR FLOW UNIT
Two types i.e Ceiling Suspended or steel stand supported with suspension chains to be suspended/hanged with the ceiling. Can also be fixed with support stands. Fabricated out of stainless steel framework of stainless steel tubular or mild steel with thick
Efficiency :99.97% (or above) down to 0.3 micron.
Blower Unit :Centri-balanced , Centrifugal motorized blower with 1/3 h.p. 1440 rpm
Discharge :Air volume 90 cfm =10%
Noise level :Below 65 db
Illumination :By fluorescent tube as per size of working area
Germicidal :By ultra-violet tube (on Request)(Approx 50 micro watts per sq. cm on the entire work surface)
Electrical : Controls are on the front facia of the chamber. Internal wirings are protected with heat resident material. Mains are through M.C.B. for higher protection against shock/damage.
Manometer :Block type acrylic/Plexi-glass inclined Static Pressure Manometer or Dial type Magnehelic Differential Pressure Manometer (Optional)
Support Stand: Stainless steel square pipe stand with levelling device (Optional)
Filter : Standard HEPE filter Manipulated HEPA filter & hour meter for U.V. Tube & Blower (Optional)
Supplied complete with : H.E.P.A. Filter, pre filter, Centri- balanced, Centrifugal Air Succession blower Unit, Flourescent Tube Light, UV tube, Static Pressure Manometer
Standard Dimensions of working area:
(I) 600 x 600 mm. (ii) 1200 x 600 mm. (iii) 1200 x 1200 mm. (iv) 1200 x 1200 mm. (v) 1800 x 1200 mm.
Other sizes can be designed as per customer specification.
Note : Optional Accessories and Test Facilities at extra cost.
Category: Agriculture Equipment
Used for the easy dividing and reduction of bulk material samples with particle sizes ranging from less than 1 mm. up to a maximum of 10 mm. Our Riffle sample divider consists of a sheet metal box mounted on legs and fitted with a series of chutes or equal width which discharge the material alliteratively in opposite directions into speculate panes. The chutes of the riffle are steep enough to allow rapid flowing of the material for the rapid preparation of sample, i.e. division into two representative portions. Each constructed of heavy gauge sheet metal, with particular attention given to reinforcement of the portions to maintain the accuracy of the slot dimensions. This equipment is mainly used for sampling aggregates, cement, ores, refractory materials, pigments, soap, powdered coal etc. It is also used for rapid collection of true representative sample from aggregates, sand and fillers.
• Rock and aggregate Industry
• Cement Industry
• Ceramics Industry
SEED DIAL CALLIPER
Good quality , Sturdiness, Smooth finish
Analog measuring device for measurement of Length and Breath of Seeds.
Precision Divider(Gamet Type)
Catalogue No. NAP-02 Size 38 X 31 X 51 Cm. (approx.) Hopper Capacity 2kg Electric Motor 0.5 H.p. Single Phase Material Chrome Plated Brass And Mild Steel Principal Centrifugal Action, Motor Driven
Display: Seven Segment FND
Seed Size: 0.5 mm to 15 mm.
No of Seeds in a Batch: Up to 9999 Seeds
• Batching, repeat and multiple
• Batches creating facility.
• Batch Count
• Accurately counts a predetermined number of seeds in a single Batch.
Repeat Batch: Allows for the continual duplication of a single batch count.
Multiple Batch Batch counts can be set to count number of batches with different seed counts